Atomization Characteristics Analysis and Structure
[12]
刘娟, 孙明波, 李清廉, 等. 基于VOF方法分析离心式喷嘴结构参数对性能影响[J]. 航空动力学报, 2011, 26(12): 2826-2833.
LIU Juan, SUN Mingbo, LI Qinglian, et al. Analysis of geometric parameters influence on pressure swirl injector performance based on VOF interface tracking method[J]. Journal of Aerospace Power, 2011, 26(12): 2826-2833.
[13]
潘华辰, 周泽磊, 刘雷, 等. 关键结构参数对离心式雾化喷嘴雾化效果的影响研究[J]. 机械工程学报, 2017, 53(2): 199-206.
doi: 10.3901/JME.2017.02.199
PAN Huachen, ZHOU Zelei, LIU Lei, et al. Influence of design parameters of the swirl nozzle on its spray characteristics[J]. Journal of Mechanical Engineering, 2017, 53(2): 199-206.
doi: 10.3901/JME.2017.02.199
[14]
JIN Y Z, ZHOU H, ZHU L H, et al. Dynamics of single droplet splashing on liquid film by coupling FVM with VOF[J]. Processes, 2021, 9(5): 841.
doi: 10.3390/pr9050841
URL
[15]
LUBOMIR B, YOHEI S. Direct numerical simulation of evaporation and condensation with the geometric VOF method and a sharp-interface phase-change model[J]. International Journal of Heat and Mass Transfer, 2021, 173: 121233.
doi: 10.1016/j.ijheatmasstransfer.2021.121233
URL
[16]
范兴华, 谭大鹏, 李霖, 等. 气-液-固三相流混合建模与求解方法[J]. 物理学报, 2021, 70(12): 261-271.
FAN Xinghua, TAN Dapei, LI Lin, et al. Modeling and solution method of gas-liquid-solid three-phase flow mixing[J]. Acta Physica Sinica, 2021, 70(12): 261-271.
[17]
马朝, 黎明, 索建秦, 等. 某离心式喷嘴雾化特性及优化设计研究[J]. 航空工程进展, 2017, 8(1): 58-67.
MA Zhao, LI Ming, SUO Jianqin, et al. Study on atomization characteristics and optimization design of a centrifugal nozzle[J]. Advances in Aeronautical Science and Engineering, 2017, 8(1): 58-67.
[18]
LEFEBRVRE A H, WANG X F. Mean drop sizes from pressure-swirl nozzles[J]. Journal of Propulsion and Power, 1987, 3(1): 11-18.
doi: 10.2514/3.22946
URL
[19]
LEFEBRVRE A H. Fuel effects on gas turbine combustion—Ignition, stability, and combustion efficiency[J]. Journal of Engineering for Gas Turbines and Power—Transactions of the ASME, 1985, 107(1): 24-37.
doi: 10.1115/1.3239693
URL
[20]
陈魁. 试验设计与分析[M]. 北京: 清华大学出版社, 2005: 20-50.
CHEN Kui. Experimental design and analysis[M]. Beijing: Tsinghua University Press, 2005: 20-50.
[1]
甘晓华. 航空燃气轮机燃油喷嘴技术[M]. 北京: 国防工业出版社, 2006: 1-20.
GAN Xiaohua. Aero gas turbin engine fuel nozzle technology[M]. Beijing: National Defense Industry Press, 2006: 1-20.
[2]
严红, 陈福振. 航空发动机燃油雾化特性研究进展[J]. 推进技术, 2020, 41(9): 2038-2058.
YAN Hong, CHEN Fuzhen. Review on fuel atomization in aeroengine[J]. Journal of Propulsion Technology, 2020, 41(9): 2038-2058.
[3]
YI Z L, HOU L, ZHANG Q. Geometry optimization of air-assisted swirl nozzle based on surrogate models and computational fluid dynamics[J]. Atomization and Sprays, 2019, 29(7): 605-628.
doi: 10.1615/AtomizSpr.2019030959
URL
[4]
DAFSSARI R A, LEE H J, HAN J, et al. Viscosity effect on the pressure swirl atomization of an alternative aviation fuel[J]. Fuel, 2019, 240: 179-191.
doi: 10.1016/j.fuel.2018.11.132
URL
[5]
HIRT C W, NICHOLS B D. Volume of fluid (VOF) method for the dynamics of free boundaries[J]. Academic Press, 1981, 39(1): 201-225.
[6]
SAKMAN A, JHA S, JOG M, et al. A numerical parametric study of simplex fuel nozzle internal flow and performance[J]. Aiaa Journal, 2000, 38(7): 1214-1218.
doi: 10.2514/2.1090
URL
[7]
LUO K, SHAO C X, CHAI M, et al. Level set method for atomization and evaporation simulations[J]. Progress in Energy & Combustion Science, 2019, 73: 65-94.
[8]
VISHNU N, UMESH U, WON-SUB H, et al. Numerical study of two-phase flow dynamics and atomization in an open-type liquid swirl injector[J]. International Journal of Multiphase Flow, 2021, 143: 103702.
doi: 10.1016/j.ijmultiphaseflow.2021.103702
URL
[9]
ASHRAF A. Nonlinear breakup model for a liquid sheet emanating from a pressure-swirl atomizer[J]. Journal of Engineering for Gas Turbines and Power, 2007, 129(10): 945-953.
doi: 10.1115/1.2747263
URL
[10]
王振国, 吴晋湘, 鄢小清, 等. 气液同轴离心式喷嘴喷雾流场数值模拟[J]. 推进技术, 1996, 17(3): 43-49.
WANG Zhenguo, WU Jinxiang, YAN Xiaoqing, et al. Numerical simulation of spray flow processes in coaxial swirling injector[J]. Journal of Propulsion Technology, 1996, 17(3): 43-49.
[11]
周立新, 张会强, 雷凡培, 等. 离心式喷嘴内流场特性的数值模拟[J]. 推进技术, 2002, 23(6): 480-484.
ZHOU Lixin, ZHANG Huiqiang, LEI Fanpei, et al. Numerical simulation of internal flow field of swirl nozzle[J]. Journal of Propulsion Technology, 2002, 23(6): 480-484.